山特维克作为世界领先的不锈钢管（包括直管和卷管）供应商之一，拥有超过100年的不锈钢工业化生产经验。
我们为满足客户的需求，不断发展了无缝不锈钢管两种供货形式——直管和卷管。
您可以根据您的工艺环境和现场需要选择适合您的产品形式，我们将与您共同找到最经济的解决方案。
U-bent heat exchanger tubes
Sandvik stainless heat exchanger tubes can also be delivered as U-bent tubes*, manufactured according to the common heat exchanger standards. Our basic specification is Sandvik spec. 7-2-1179, but we can also use DIN 28179, TEMA RCB 2.31 or various customer specifications. Copies of all specifications are available on request.
Technical parameters
- OD 12.7- 38 mm
- Bending radii from 1.5 x OD up to 1,250 mm. Minimum bending radii for OD over 28 mm after agreement.
- Leg length min. 1,000 mm.
- Leg length max. 12,000 mm.
- Heat treatment for radii up to 1,000 mm.
Heat treatment
If specified, we are equipped to carry out heat treatment of bends plus minimum 150 mm of leg.
- Furnace is computer controlled and all data is recorded.
- We use an Argon protective atmosphere inside the tubes.
- We can supply all types of annealing; solution annealing, stress relieving and stabilization.
Measuring, cutting, deburring and cleaning
- U-bends are measured exactly in accordance with relevant standards.
- All tubes are cut to the specified leg lengths, ends are deburred and the tubes are internally cleaned with air.
- Before packing, both ends of U-bends are capped with plastic caps.
Packing
- In strong, open or closed wooden boxes, depending on destination - max 8,000 kg.
- Ends of tubes protected by plastic caps.
- Vertical separators for each radius.
- Chloride free plastic separators between each row, every 2 meters.
- Each bundle is covered with plastic.
- Customers can provide a packing drawing or Sandvik can prepare a packing plan.
- Packing lists, covered with plastic, are placed on each wooden box for easy identification of order details, including exact list of radii and lengths inside.
* Valid for wall thickness less than or equal to 4 mm/0.157 in.
Heat exchanger tube in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys, titanium and zirconium, suitable for all types of heat exchangers, such as seawater coolers, condensers, evaporators, heaters and reheaters.
Sandvik's heat exchanger tube program includes imperial and metric sizes, from outside diameter 12 mm up to 40 mm (0.472 to 1.575 in.). Special sizes can be made to order. Sandvik heat exchanger tube are supplied in straight lengths up to 30 meters, or as U-bent tubes.
